dead rokr with ramldr get 10[]

[jzzz]

Try this:
1.Download BL 07.DO from e398mod.com
2.Open Flashbackup 3
3.Try to flash with that BL

[jzzz]

If that method still the same result.
So try other method.
Do it with ramldr too.
But pass the TP and erase step.
Do the next step.

[jzzz]

If that method still the same result.
So try other method.
Do it with ramldr too.
But pass the TP and erase step.
Do the next step.

[jzzz]

If that method still the same result.
So try other method.
Do it with ramldr too.
But pass the TP and erase step.
Do the next step.

[deQiu]

Try this:
1.Download BL 07.DO from e398mod.com
2.Open Flashbackup 3
3.Try to flash with that BL

i've done that too..sending loader is OK, jump is OK too...but erasing get error...i've try many times to flash it with BL only or other full MP...but still get error

if im not wrong (since it has been 2 years ago) original FW of my ROKR is OA.02 R373....79R. i just remember the first and the last of it. and at that time (2 years ago) i flash it with FW 49R for ROKR..after that i get dead phone until this time..maybe this is related to the problem..

[deQiu]

If that method still the same result.
So try other method.
Do it with ramldr too.
But pass the TP and erase step.
Do the next step.

the problem is i cant get it erased...so do with ramldr...no "ack erase" appears altough i wait until 1 hour..after that when i reopen ramldr and do erase again..i get 10[]..so i do TP......it happen again again and again in cycle..

[tata78]

I will try to help you.
1. You must deassemble your phone
2. run Ramldr
3. connect cable in your phone and in PC
4. short TP pin
5. then put battery (dont remove paper clip from TP pin)
6 if you get connected on ramldr remove paper clip but still hold battery
7.hit erase and wait max 5 min ack erase must come
8. if you dont get connected in step 6 try again everything from step 1 until you get connected
9. when you get ack erase follow instruction from my tutorial

[deQiu]

I will try to help you.
1. You must deassemble your phone
2. run Ramldr
3. connect cable in your phone and in PC
4. short TP pin
5. then put battery (dont remove paper clip from TP pin)
6 if you get connected on ramldr remove paper clip but still hold battery
7.hit erase and wait max 5 min ack erase must come
8. if you dont get connected in step 6 try again everything from step 1 until you get connected
9. when you get ack erase follow instruction from my tutorial

thanks Tata78..here are what i do..
1. i've deassemble the phone
2. i run rmldr
3. i connect the cable
4. i short TP pin
5. i've get connected the phone on ramldr
6. i've do this step too
7. this is the problem..at step 7.......i hit erase and nothing appears.....no ack erase until 1 hour..
8. i can easily connected.......... but altough i dont do TP i can still get it connected
9. how about no "ack erase"?

[jzzz]

I mean that you are don't need get ack erase,try to pass that step.
Do the next step,maybe it'll make a good change!?
Owh,the last firm is 79r right?
I think you are stuck on it.

[deQiu]

@jzz
Nope..79R was not the last,but its original fw was 79R,and i remember now..at that time (2 years ago) i flash it with 46R..and fb (at that time) read it as 46R but no IMEI..that happened 2 year ago..and the phone was dead until now

Here is  newest result that i've get..as long as i remember the origin of the case..so i try to flash it with MFF with fulflash of R373_0E_30.79R..and i think there is some clue of my case..MFF failed on proccess but after flash it i got this on the phone screen:

Critical error
8O
4A
-----

And slowly the screen become blank..What is that mean? Is there any clue on it?

[deQiu]

I dont know thats good or bad news..but at least there something appears on screen after 2 years..hehe

[jzzz]

Hah??
You mean that you have killed your phone for since a years ago?
Why you are flash 79r using MFF?

[deQiu]

Yup,this phone has been slept for 2 years,at that time 2 years ago i also post it here..but yet solved..until now

I do that because i've run out ideas, i've done all things i know but still nothing

How about critical error 80 4A that i get? Is there a clue on it?

[jzzz]

I never got that case.
My suggestion is only try and try untill solved.
Try to open your mind to get the inspirations 4 mix all method that ever you got.
And still pray to God for giving an ideas to do it,good luck m8.
Hope you did it!

[deQiu]

thanks Jzz

this time....i try to mix some methode here. i try to patch some MP (79R) with releasing 79R patch...its sound weird maybe...but  from any FW that i flash to phone only stock rokr 79R that give me a respon..altough it is give me "critical error 80 4A"...

these are the log from FB306 with rokr79Rmodified:
Extracting data from firmware file...
Sending the loader...
Done.
Executing JUMP...
Done.

......and just like that for no limit time...it's freezing at that step

i try ramldr again...send ramldr..erase ...and like this:
Switching to flash mode
ADDR03FD0000AD
JUMP03FD0010AE
ACKJUMP,03FD0010
10

so i do TP...then try ramldr again:
Switching to flash mode
ADDR03FD0000AD
JUMP03FD0010AE
..then i hit erase................nothing happened until 30 minutes.....

confusing huh...

im thingking about critical error 80 4A that i get when trying to flash with stock rokr 79R....there should be any chance on it...