E398 fail turn on after flashing

[cosminmaxf16]

 what the hell     even that don.t work after 2 hours  keeping the usb in connected no move   remainds like that!http://yfrog.com/afffffffpp

[Exploited]

Put it manually in bootloader and connect. Looks like it is not in bootloader, but turned on normally...

[Exploited]

TO turn bootloader remove the battery. Insert it back. Then with one hand hold # + * (the two buttons together) and then with the other hand press the RED start button.

[cosminmaxf16]

i put in in bottloand  AND  FIRST TIME , i  belive the problem is with this 10  WHICH APPEAR AFTER I  PRESS ``ERASE`` http://img265.imageshack.us/img265/8029/fig.png .. 

NO more  fast answers??:-p

I HAVE AN IDEEA i buy another MOTOROLA E398  WITH ORIGINAL FIRMAWARE IF i make a backup to  it  and i install the backup files to    MY   BROKEN  E398   WILL WORK ?

 AND  ONE MORE  PROBLEM  EVEN  THAT   RSD LITE SAY THE PHONE IS CONNECTED , WHEN I insert the usb cable in pc    IN  right bottom of  desktop say something ``  the  conncetion is damage or missing files`` somethik like that .. i think  i must reinstall  the  e398   drivers  ITS  good DECISION?

[jzzz]

Everything you need have already pack in my reviving tool
It was include Aze2learn,Testpoint picture,MultiFlashFlex and 42r for all.
First of all you need to do a testpoint,
Connect your phone using usb data cable to a computer and open ramldr.exe and follow the step in aze2learn
connect the testpoint area to the ground using a clip or something
do the testpoint until you get connect in ramldr,
after you get connect you can pull out the clip
then you must follow the step from aze2learn
after you finish the step you'll get the bootloader in r372
if you got the boot,you can open the multi flash flex and directly flash 42r for all
after all,you can flash another FW/MP you like
i have tried this method,never get failed,in every dead case of e398 or rokr e1 i always success to revive using my reviving tool.

and i was look your attached picture,
i look that you get a 10square,
it's mean that you are not doing a testpoint or maybe you are not doing a testpoint rightly
so you need to make sure that you are doing a testpoint rightly.
You can look the picture in my reviving tool about testpoint.
you need to connect the testpoint area to ground,
i usually safety pin to do testpoint.
if you are not expert to do testpoint,
i advice you to ask someone help,
coz it quite complicated do with one person if you are not expert to do it

[ZduneX25]

Everything you need have already pack in my reviving tool

I told him... https://motohell.com/index.php?topic=5843.msg72241#msg72241

[cosminmaxf16]

where is jzzz`tutorial with picture?

[weirdstranges]

Try to flash 42r for all using PST(multiflashflex)
you can get it from my reviving tool

Hi Jzzz,
Nice to see u. I glad to see your guide.

I really dont know, why it doesnt work after flash with W398SE , Iguess, coz it seems like Med Center 48R :

I try with your 49R MP, but it still not work, blink2.

Can you help me to enable your 49R MP ?

I guess, it is like sticky in old MP.

And, can you update your Mix 79R? on java setting? We need to set it up by our permission, Jzzz And other themes with iTunes, I hope.

Thanks for your help and your post.

[weirdstranges]

    I HAVE ONE MORE QUESTION   in this  picture u can see the problem  the first 3 connections are broken  THIS 3 connection MUST BE REpAIRED TO usb. mode can work cuz WHEN I  try upgrade it  i have ``luck `` that   the usb work  . EVEN  THE Charger dOESN.T work in PAST i charge the batterY  WITH  that..http://img841.imageshack.us/img841/5029/inacrcator.jpg

 ***************

Try to enable your phone with usb charging enable by opcode.

[cosminmaxf16]

    I HAVE ONE MORE QUESTION   in this  picture u can see the problem  the first 3 connections are broken  THIS 3 connection MUST BE REpAIRED TO usb. mode can work cuz WHEN I  try upgrade it  i have ``luck `` that   the usb work  . EVEN  THE Charger dOESN.T work in PAST i charge the batterY  WITH  that..http://img841.imageshack.us/img841/5029/inacrcator.jpg

 ***************

Try to enable your phone with usb charging enable by opcode.   this is not still a problem  THx ANYWAY  my major problem is  just a thing THE  motorola e398 (reflashed to e1 ) IS dead  THAT`S all .. THE  jzzzz TUTORIAL  IF EXIST  COUZ I DON.T SEE IT . msybe  help me   couz have photos , i don.t know  the terms of motorola modders    for  that are  the photos .. if u understand ...CHEERS!

[cosminmaxf16]

no more answers again