Qtopia for E2

[zka]

heyy
i'm using blackstorm firmware..
by the way..
can you write again the step from first to the end ?
coz my qtopia doesn't work ..

i copy the qtopia files to root on sd
then i created qtopia folder on ezxlocal..

if i start script via telnet is also like this
"root@ROKR E2:~# insmod/mmc/mmca1/ext2.o
-bash: root@ROKR: command not found"
i'm very-very sure that i write the correct path

but it doesn't work ..!!
i don't know why ..

somebody help me pleasee !!!!
*sorry for my poor english 

[BlinK_]

But a space between insmod and the path.

[zka]

hey blink..
thx for the help that is my fault ..
btw
i get same problem with you blink..

root:~$ insmod /mmc/mmca1/qtopia/ext2.o
/mmc/mmca1/qtopia/ext2.o: init_module: Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
[09:49] root:~$ insmod /mmc/mmca1/qtopia/loop.o
/mmc/mmca1/qtopia/loop.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg

any possibilities to install another step ??
*sorry my english is not good

[BlinK_]

Just skip these two insmod steps. When you execute the last command give it a minute or two to load.

[zka]

ok blink !!
i will try it
just tap the .lin files than wait for a minute right blink ?

thx for the help b4.

[GeozTsai]

I got tapi sever disconnected with blackstorm and it freezes...

[BlinK_]

Yea, I get this message two. Wait for a bit longer. It should boot up after some time.

[whiteroad]

sorry for repost but... I did it!!!! i managed to run qtopia from phone with normal size font and icons, with this fix now we can run it with my mpkg (or any other script) without a computer.

The trick is very simple, just paste this line:
^{export QWS_DISPLAY="LinuxFb:mmWidth43:mmHeight58:0"}

in the file start.sh, just under the line:
^{export HOME=/ezxlocal/root}

and its all, now it will work well from phone. you can play with the values, lower values bigger icons and fonts.... for example
^{export QWS_DISPLAY="LinuxFb:mmWidth35:mmHeight44:0"}

will bring you bigger icons and fonts.

Thanx to winfuk for pointing me to the right direcction 

P.D. tested with my mpkg and works like a charm.

Guys do this. and it'll be fine 

sry for my poor english

[zka]

woww !!!
this is very greatt ...
thanks very muchh !!!
 

[GeozTsai]

how long should I wait? I waited for about 5 minutes and it still doesnt work

[dwalker]

if the tapi server message do not desapear it means that your phone is freeze, the message should appeare and then desapear in seconds, then qtopia will load, sometimes the message stays and the phone get freeze, i dont know why. maybe you should try to run it from telnet to see if there is an error message.

[whiteroad]

how long should I wait? I waited for about 5 minutes and it still doesnt work

run it with telnet. It's ok for me when I run it from telnet 

[AV3LaR]

But it's even better to use it has a .MPKG just need 2 icons even .JPG and a Qtopia.desktop file with some info inside

[Desktop Entry]
BigIcon=Qtopia.png
Comment=Qtopia modded by Mothell.
Exec=Qtopia.lin
Icon=Qtopia_s.png
Name=Qtopia
OsVersion=0.1
Shared=0
Type=Application

and 2 icons Qtopia_s.png and Qtopia.png, and the .lin script called Qtopia.lin

#! /bin/bash
cp /mmc/mmca1/QFiles5/hwtool /mmc/mmca1
insmod /mmc/mmca1/QFiles5/ext2.o
insmod /mmc/mmca1/QFiles5/loop.o
mkdir /ezxlocal/Qtopia
mkdir /ezxlocal/Qtopia/etc
mount -o loop -t ext2 /mmc/mmca1/QFiles5/qtopia.img /ezxlocal/Qtopia
cp /mmc/mmca1/QFiles5/defaultbuttons.conf /ezxlocal/Qtopia/etc
sh /mmc/mmca1/QFiles5/start.sh

[jerimy386]

I have blackstorm firmware... but the qtopia doesn't work, it freezes my phone, I do by the two ways.
Please help me!!

[gauge.e2qd]

 

i'm confuse???

what qtopia is for???