Critical error DEDE 00AD

[Jithin]

Hi all,
This is for my friend who has an L7i and got this critical error while flashing an MP. Now the phone screen shows only the above said error.
He has a full backup but his phone isn't shown connected in FB. We've tried RSD Lite,MFF etc but no result.

I've searched the above term on google and got some pages on motofan Since neither of us knows Russian,we need some the help of the Russian friends out here. Babelfish too didn't help much.

Here is the page. Someone please translate it to English.

http://forum.motofan.ru/index.php?showtopic=115561

BTW,we are ready to do a TP if needed..

[Exploited]

1. Make a tespoint
2) Connect to the comp and start RAMLDR2
3) Push Send Loader, the program will show "ready";
4) Push Write Boot - select Boot_0AC0_patch.bin (after that the phone will turn on with blank screen -> that's normal), press OK;
6) Flash the firmware with FlashBackup
7) Start the phone - it will still show blank screen,  start RAMLDR2
Press Send Loader, program shows "ready";
9) Press Write Boot - choose Boot_Start_SW.bin
9) Restart the phone and be happy

Edit: That topic is for removing RSA on the phone. They write "if you get Critical Error, do what is written above"

[Jithin]

Thanx a lot Phil for that
But,no idea about how that TP is done.. That doc file is in Russian too..

[Exploited]

You connect the ground and the other thing that is pointed with the arrow with some metal and plug the battery - that;s it

[Jithin]

Thanks for the help Phil.. But my friend has already given it to Moto service centre (expecting he can claim his warranty )

[motomaniacs]

hope your friend's phone can be back alive again bro

[cordagz]

Hello Exploited,

Please help me revive my L7i. I flashed it with Thelaxplaya7_Z3 MP. After flashing, my phone wont turn on. I can't open boatloader also. The worst thing is, I forgot to backup my phone.

[Exploited]

well you must follow the procedure above... That's all I can say

[cordagz]

Thank you for your quick reply.

I don't have a backup. Can we revive the PDS using Ramdl2?

[Exploited]

are you sure that your PDS is broken? That's too rare situation and it is not likely to happen

[ru_dee]

Sir, i got the same problem l7i critical error
i had tried using above procedure, but ramldr shows usb: i0 timeout
here's log

Code:

USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
Loader sending at addres 03FD0000AD
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!
USB: IO Time-out!

i did this:
1.connect phone to pc using mini usb cable
2.attach tp A to tp B

3.attach 4v Power supply
4.clicked send loader on ramldr

[ru_dee]

did i do anything wrong w/ that procedure?
this is my first moto tp experience
pliss help

[tankian]

Yes i have the problem like you
i think yo operate ramloader inthe pin of startmenu
try starting ramloader inside the folder that contin loader file besaide the rmloader aplication
important don't pin to start menu ramloader..

[ru_dee]

indeed, i run ramldr from its folder..
did you manage succeed sir, doin' tp?

ps: jawane ngendi Sir paklik?

[ru_dee]

1. Make a tespoint
2) Connect to the comp and start RAMLDR2
3) Push Send Loader, the program will show "ready";
4) Push Write Boot - select Boot_0AC0_patch.bin (after that the phone will turn on with blank screen -> that's normal), press OK;
6) Flash the firmware with FlashBackup
7) Start the phone - it will still show blank screen,  start RAMLDR2
Cool Press Send Loader, program shows "ready";
9) Press Write Boot - choose Boot_Start_SW.bin
9) Restart the phone and be happy

sir, i did follow those steps above, it was okay from step1 to 4
but found problem when i flashed firmware w/ Flash&backup,
phone is successfully connected in blank mode w/ flashnbackup, but got this error message when flashing

Code:

------------------------------------------------------

*** Operation start (12/10/2009 19:30:09) ***
Flash&Backup 3.0.7
Write data: C:\DOCUME~1\admin\LOCALS~1\Temp\fb3\~quickflash\qflash.f3u

Sending the loader...
Done.
Executing JUMP...
Done.
Erasing memory... (Progress of this process is not shown)
Error!
Sending code group: CG1
Error!
Sending code group: CG2
Error!
Sending code group: CG3
Error!
Sending code group: CG4
Error!
Sending code group: CG7
Error!
Sending code group: CG15
Error!
Sending code group: CG18
Error!
Operation done.

*** Operation end (12/10/2009 19:31:08) ***

i wonder what could be the problem?
fyi: i tried this firmware
-R452D_G_08.03.0AR_PDS00B_LP0003_DRM0101_VSTG_30D_0d_JPJAVA_G_08_L7iDI_88_88_12R_GITHAWI001AA0A7_1FF
-R452D_G_08.03.0AR_PDS00B_LP0003_DRM0101_VSTG_30D_0d_JPJAVA_G_08_L7iDI_88_88_12R_GITHAWI001AA0A7_1FF-698

could it be i use wrong fw version?
or perhaps i should tick another setting in f&b to make it work?