[E2] firmware TITANIUM EXTREME

[cordagz]

Is there a solution with subsidy problem? I tried flashing my old FW but the problem still exists.

[GeozTsai]

Help...... OMG!!!

[NestorM]

for everyone with subsidy locked problem in this FW Titanium Xtreme. this is the solution!
just translate, and follow step by step.
http://www.modmymoto.com/forums/showthread.php?t=53235&highlight=subsidy+code

[spartan_shoes]

wow.. my phone is locked.. anyway, i can still use it without sim card.. wtf!?!?? can't connect to modmymoto.com.. please paste the solution here.

[NestorM]

ok, original from http://www.modmymoto.com/forums/showthread.php?t=53235&highlight=subsidy+code
I just translate with google tool, because my english is bad. look at this:

Thanks to "ppppepinillo" by the input to many who asked if subsidy code flash it with FW de corporation or with the telcel ...this can work with titanium xtreme

Reading Subsidy Code with p2kSupportTool

THIS IS ONLY FOR CELLULAR DESBLOQUEADOS

The program is included in the p2kSupportTool PST
Once downloaded and installed go to the folder where the PST installed, usually "C: \ Program Files \ Motorola \ PST" and seeking an executable under the name "PST" and has a blue icon also said that Gradient PST. Well, this is the p2kSupportTool

(Below is the entire image illustrative of the entire tutorial)

1) connect the phone to a PC and run the p2kSupportTool, expect to be detected.

If this correctly connected in the table is at the bottom left (above DEVICE) should read "Motorola p2k"

2) Will the "Test Cmd"

3) Under "Command Type" select "Normal"

4) Under "Test Command" put: RDELEM

5) Under "P2K-USB Data Command" enter the following codes:

0x01
0x5D
0x00
0x01
0x00
0x00
0x00
0x04

Latest once done in the table above selects Motorola p2k "to activate the control commands and will return a series of codes in the second column, under" P2K USB-Response Data, "is always the first data "0x00" (which ignoraremos), and those who still belong to Subsidy Code, to read them must be given back the two last digits and put them together, we see an example:

If, as a "Response Data" we have the following:

0x00
0x21
0x43
0x65
0x87

Then:

0x21 = 12
0x43 = 34
0x65 = 56
0x87 = 78

Therefore our Subsidy Code: 12345678

To see the Subsidy Code - Secondary "(secondary) do the same thing, but enter the following under" P2K-USB Command Data ":

0x01
0x5C
0x00
0x01
0x00
0x00
0x00
0x04

(Look it is only changing the "D" for the "C" in the second figure "0x5C")

[diablo_im]

where can i download that PST? 

[NestorM]

use google to find

[Gog]

Do you put this file in the first bootloader?

I setup mode firmware BP and flashing (my phone boot loader: boot_g_oo.02.05r_sumatra).
PST view Error:

sorry my bad english (translated by Google)

I met the same problem with him. Now I can't turn on my phone, neither flash it to another version. Can anyone help me??? Can my phone be recovered???

[kvorought]

Hola, tengo el mismo inconveniente del codigo subsidy. Encontre esta guia para instalar el PST:

http://www.somelifeblog.com/2007/05/pst-phone-programmer-download-and.html

Pero no sé como hacer que reconozca el telefono. Lo conecte en modo modem y nada. Alguna idea?

[NestorM]

hola en ingles porfa, sq asi son las reglas del foro
in english please.

you need this p2kSupportTool in PST folder.
in p2kSupportTool you may conect the phone without problem, modem mode.

[see.n.think]

My E2 locked too..... But I've get that PST!
I hope it solve that problem!

[cordagz]

I followed the PST solution but no Response data will appear.

[Ju4nCh0]

No problem with me....

Ey guy your phone is unlocked? I think if you have a phone locked for some company you might not have problems with subsidy code.

Sorry, i don't speak english very frecuently

[Joka X]

my phone is not locked when i bought it.....i bought it from independent mobile phone shop so it's not locked.....

[diablo_im]

i follow all the PST procedure until step 5,select Motorola P2K but nothing happen..no P2K USB response data, please help..