rokr e1 not so easy

[underweb]

First two things
1) i dont speak english
2) I all ready read and read and read.... BUT...

My rokr is dead...
I do ALL ALL ALL but cant do he work again.
Including a testpoint!! (various)

I flash the phone with various MP, flashes, full flashes, etc...
Some of this files do all the work OK. But When de phone is power on, only show the HELLOWMOTO screen and shutdown automaticaly.
Always the same.
A try with all software, step to step but nothing happens.
Always the same result.

Data in screen:

Boot Loader
0A.02.
SW.Version:
R373_G_0E.30.49R

I put 42R, 46R, 48R and 49R
But........

Please help!

Obviously I havn't a backup!

Thanks and sorry for my english!

------------
Edit (ADD)

In SmartMoto a receive this error menssage:

SmartMoto 1.23
Searching for phone... found Motorola P2K, getting test interface... interface not found
Phone seems to be in flash mode, try flash functions

[dwi.wicaksono]

You should use an E1 ROKR MP not the E398 one.

[underweb]

Mmmmm...mmmm... ok...
But, can you giveme a link?
I'm very confuse bitween e398 and rokr E1 MP's

Thanks

[error398]

just see the Bootloader Version..

E398 MP's = 07.D0
E1 ROKR MP's = 0A.02

[Antrix]

Try this method.

Author: tata78 (motomodders)
Original link: http://www.motomodders.net/Default.aspx?tabid=55&forumid=13&postid=340057&view=topic


This is my first tutorial. I hope it will help someone.
You need:
1. aze2learn_ramldr_special_repair_kit
2. 42R for all (full flash not CG7 only)
3. T5 screwdriver
4. metal paperclip
5. MFF (MultiFlashFlex tool, a part of Motorola PST)

Run ramldr connect your phone to PC if ramldr recognize your phone, you will see at bottom left corner connected then you do these steps


1) Click 'send ramldr' and choose 'ldr_all.bin'
2) click erase button and wait for ACK ERASE (nothing will be shown about 3-5 minutes) .. be patience
3) once you see ACK ERASE .. change base addr 10000000 and click send binary. Choose '20000only.bin' file and wait about 2-3 minutes after that you must have bootloader 07.D0 on the screen
4) Now you run MFF and flash phone with 42R for all FULL FLASH. (I tried with flashbackup it did not work)
After that flash any MP you want
______________________________________________________________

If ramldr dont recognize your phone or you cant get ACK ERASE , you getting error or "10" you must do test point.First you must prepare everything for TP. I will not explain how to do there are lots of great tutorial and pictures about that.

1)run ramldr
2) connect your phone with PC (phone must be deassembled without batery)
3) short testpoint pin (I used metal paper clip)
4) put the batery on and watch if ramldr shows connected, if dont remove batery and try again until you get CONNECTED
5) once you get connected you do everything in this order

1) Click 'send ramldr' and choose 'ldr_all.bin'
2) click erase button and wait for ACK ERASE (nothing will be shown about 3-5 minutes) .. be patience
3) once you see ACK ERASE .. change base addr 10000000 and click send binary. Choose '20000only.bin' file and wait about 2-3 minutes after that you must have bootloader 07.D0 on the screen
4) Now you run MFF and flash phone with 42R for all FULL FLASH. (I tried with flashbackup it did not work)
After that flash any MP you want.

The point is to get ACK ERASE, you must doing TP until you get ACK ERASE.

Thanks to aze2learn and avatar_43 who helped me when my rokr was dead.
I hope this will help, that way I revive my ROKR!

[dwi.wicaksono]

Mmmmm...mmmm... ok...
But, can you giveme a link?
I'm very confuse bitween e398 and rokr E1 MP's

Thanks

Check on the Symphony 46R MP by Montox thread, there's a version for your phone.

[underweb]

Antry one more question...
ALL the process with de testpoint "conected" ??

3) short testpoint pin (I used metal paper clip)
4) put the batery on and watch if ramldr shows connected, if dont remove batery and try again until you get CONNECTED
5) once you get connected you do everything in this order

Or when RamLDR show CONNECT i disconnect testpoint and continue without it??

[dwi.wicaksono]

I think you don't have to do the testpoint. Just flash your phone with an E1 ROKR MP.