Help Me please!

[lanvasquez]

  ???Help Me

         I have write to in desperation. Because I have downloaded
 one file on Motorola e398 Modders.com, and try to use it as i connect my mobile phone... my
> phone's screen turns black and says that it was transfer mode..
> but when it finished i cant open my phone. My phone seems dead...
> PLEASE HELP ME!!! the File im questioning was
> "elektro255_mod_0.4A4.rar" and "updater.exe". What do i have to
> do!
>
> My Mobile was Motorola e398 (Hijacked). Thanks for your response.

[motomaniacs]

did you make back up of your phone??
if it so just restore the fullbackup...
I guessed you should upgrade your phone First before flashing any R373 MP

[Exploited]

I replied by e-mail to lanvasquez already. Here was my answer:

"Don't worry - most probably you didn't converted from R372 to R373 before
the flash

Here is what you have to do:
1. When it's turned off press and hold the * + # and press the red button
(start). You should enter bootloader. Even if the screen is completely
white or crapped - no worries.
2. Connect your phone with datacable
3. Use the flashing software and flash this:
http://www.e398mod.com/content/view/506/30/
4. After the flash is complete your phone should be working fine. You may
need to remove the battery once after the flash (only if it do not turn
on)
5. Now you can flash the Elektro firmware"

[motomaniacs]

hehehe at last phil you recommend to use 42R_For_All
LOL

[Exploited]

followup on the e-mail (sorry I cannot help here): He is not able to flash anything in bootloader mode, because when he connect his phone to the laptop he get "USB Device Not Recognized"...

I asked him to reinstall drivers, but it shows the same thing

Anybody to help?

[Exploited]

edit: forceboot suggested

[darwin_rodgers]

try to flash it again
with another mp

[Exploited]

that's his problem - he can't. When he connect his phone it shows "Device not recognized"

[motomaniacs]

try changing the usb Port

[error398]

i've problem like that b4.. my solution is try to twisted usb cable and its worked sometimes hahaha..
try to use toothpick for cleaning ur connection from the bottom of ur phone..

hope u understand for the explains..

[darwin_rodgers]

please detail it

[motomaniacs]

i've problem like that b4.. my solution is try to twisted usb cable and its worked sometimes hahaha..
try to use toothpick for cleaning ur connection from the bottom of ur phone..

hope u understand for the explains..

thats what im talking about changing the USB port

[error398]

how to explains haa.. its hard, my english is broken bcoz im from malaysia

[motomaniacs]

let me help you describe it
error398 said to cleaning ur connection using toothpick he mean that cleaning the bottom pin connector of e398
is that right

[error398]

yupss.. thanks for describe it.. hope u can understand darwin_rodgers