Stuck in 79R

[flaboy]

can anyone help me:(..i have a problem with rokr e1. i can't flashing my rokr with mp 49R, it was happent after i flashing my rokr with mp 79R...thx 4 any help.

[ZduneX25]

have you full backup?

[flaboy]

no..i didn't ..

[jzzz]

Try my mixed 49r,coz sometimes it would be helpfull when getting stuck in 79r.

[anthonyhermawan]

1)Extract 4xR MP you want to flash by FlashBackup 3 in Firmware tab, then save with SMG format.
2)Open CG1.smg by XVI32 Hex Editor, download it from e398mod.com, PC SOFTWARE tab.
3)In Xvi32, find offset 00001B, its exactly located in the first row. Change it from 00 to 01, save again in BIN or SMG Format. Ex. CG1.smg or CG1.bin
4)Back to Firware tab, in Flashbackup 3, open your 4xr mp again, then select Cg. Fimware then replace with edited CG1.
5)Check Remove RSA protection LTE2 Phone new methom, choose the second one.
6)Select quick flash.
For now on, you should do the above methode before flash any 4xr mp.
Trust me. IT WORKS.

[XL-DJK]

2)Open CG1.smg by XVI32 Hex Editor, download it from e398mod.com, PC SOFTWARE tab.
3)In Xvi32, find offset 00001B, its exactly located in the first row. Change it from 00 to 01, save again in BIN or SMG Format. Ex. CG1.smg or CG1.bin.....

what do you mean offset 00001B? and it being in the first line?

Can you tell us the Adr. hex that needs to be changed from 00 to 01?

i THINK you mean go to offset 1B and change from 00 to 01....right? and that it'll be easy to notice because 00 00 preceeds offset 1B

[anthonyhermawan]

Yes, i mean offset 1B, change it from 00 to 01. It is in first line.