Moto Hell - The Motorola Modding Community
November 01, 2024, 02:27:41 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The forum is no longer active and registration is disabled; however you can still fetch everything as guest.
 
   Home   Help Facebook Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: E2 not picking up network  (Read 4476 times)
DeeZy1611
Guest
« on: May 09, 2008, 06:16:09 am »

my E2 took a small fall(from my bed to my carpet floor) and when i tried using it next it had no network service. i tried the same sim in another phone and it worked. i tried a sim from another network in my E2 and i got service...what can be the problem? solutions?

RaS DeeZy[/color]
Logged
DeeZy1611
Guest
« Reply #1 on: May 09, 2008, 07:20:30 am »

oh and on the second network the service comes in about 3 bars and goes often
Logged
basu_e2
Guest
« Reply #2 on: August 18, 2008, 02:43:12 am »

I am also facing same problem. Have you got the solution? If yes, Please let me know the solution.
Logged
Exploited
Administrator
Ultimate modder
*****

Karma: 109
Offline Offline

Posts: 5153



View Profile WWW
« Reply #3 on: August 20, 2008, 11:52:33 am »

LOL that sounds too weird. This have no real sense explanation...
Logged

basu_e2
Guest
« Reply #4 on: August 20, 2008, 07:57:30 pm »

The problem is my E2 is not able to pick up the network. When we insert the sim first few minutes it will search and then it goes to No service. I have tried 2-3 sim card and facing same problem for all sim cards.
I have tested same sim card on SE K750 and they are working fine.
I tried to following things in network settings

1: Most of the time, It says that network is not registered in current network
2: scan available network, It will scan for few minutes and then it will come out not showing any available network.
3: Same problem with "Find new network"
4: My network list will shows some network.

First, I was using MAX2 firmware. I faced same problem and after that I have flashed Blackstorm. I am facing same problem in this firmware also.
I have googled it and found this might be due to antenna problem. I consulted Motorola service center in India but they are telling this mobile is not released in India and they could not repair it.

If someone know How to rectify this problem then please let me know.....

Thanks in Advance
Basu
Logged
Taurnil
Guest
« Reply #5 on: August 22, 2008, 07:11:47 am »

just apply the right flex (bands)
Logged
basu_e2
Guest
« Reply #6 on: August 23, 2008, 04:10:07 am »

Thanks Taurnil,

Please let me know How to apply right Flex(Bands).


Logged
AV3LaR
Guest
« Reply #7 on: August 23, 2008, 07:10:22 pm »

You need to read this it's gonna be useful
http://www.e2mod.com/content/view/165/29/

We are updating the article with more direct adjustments by Scottish and Xronos. Now using THIS flex you can directly enable Edge, Engineering and Quad-Band with few click:
1. Open Radiocom, choose GSM - Main-MA-GSM, and go to Settings-TCPIP-MLINK USB LAN Driver. Connect the phone in "Modem" mode
2. Go to "Common Applications -> Flex Programmer"
3. Choose the flex file and flash it!

That's it - you will have Quad Band phone with Engineering and EDGE enabled! Tested on 41P, 46P and 48P

------------------------------------------
Here is the old tutorial (suitable for people who wish to know how to "do it yourself"):

This tutorial describes how to enable EDGE on Motorola ROKR E2. Thanks to Scottish and Xronos from Motofan!

1. You need to open the program Radiocom (this is copyrighted software - do not ask us where to download it! You need to buy it!)
2. Connect the phone to the computer in "Modem" mode. In Radiocom select Main-MA-GSM and then select Settings -> TCPIP -> MLINK USB LAN Driver
3. Go to Common Applications -> Flex Programmer, select this flex (this is European flex from 41p, which works on all firmwares) and press the FLEX button. During the flash you may receive errors - no worries it do not affect the firmware, so select "Ignore ALL failures"
4. Go to GSM2, open seem 0341_0001 and change FF to 01 and save it
5. Now open seem 0340_0001, set length to 0008, replace the 000...00 with 09 05 03 02 01 02 00 00 and save it
6. Open seem 02AF_0001, set length to 0002, replace 27 (could be different) to 75 and save it
7. Open seem 010A_0001, set length to 0002, replace 01 (could be different) to 03 and save it.
8. Now open seem 0032_0001, open it with XVI32 or other hex editor (check the seem editing tutorial) and change offset 0089 to 0C. Convert it back to hex string and save it on the phone back with Radiocom.
9. Disconnect and reboot the phone. Enjoy EDGE!!!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Design By Forum Hosting
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines