Ok I've downloaded this from e2mod.com and I don't have any clue on how to install it. I've read the readme file and still i don't have a clue.
so can you help me through this?
here's the link for the file:
http://www.e2mod.com/content/view/89/26/Right now I'm using Titanium Extreme II, but I need to switch back to a stock version. With the flex information "Retail Brazil Customer Model Model".
Thanks in advance.
btw, here's the readme info:
Notes For Flash
****************
You MUST use RSD 2.3 or above to flash the code
***********************
Step 1: flash BP part
***********************
To enter BP flash mode, hold VR key and insert battery(or apply power) then press power key, when red screen appeared, then release the VR key and press VR key again, it will display "USB BP Pass Through Mode", that means you have entered into the BP flash mode.
1. Flash the BP phone code:
Use the R564_G_12.00.46P_flash_dev_rom.shx to flash your phone
Please follow below step to upgrade your phone
s1. Backup your Phasing data, (Sumatra_Default_Phasing_Data_13R.nvm)
s2. Download the eraser superfile Barbados_Martinique_production_Eraser.shx, then flash it into the phone
s3. Download the Blanking superfile(R564_G_12.00.46P_flash_dev_rom.shx) , then flash it into phone
s4. Resotore your phasing data
s5. Flex BP Manufacturing flex version
2. Flex BP non-manufacturing flex version you need to select the flex model that you should flex according to your own requirement
**********************
Step2: flash AP part
**********************
To enter AP flash mode, Hold VR key and insert battery(or apply power) and press power key, red screen will appear and display MBM FLASH MODE
Please be noted that this flash step is only for P6 or above phone, we won't provide P5 or blow phone support any more
S1. If your phone's version is lower than R564_G_12.00.21P or your boot version is not BOOT_G_00.02.05R_SUMATRA, flash R564_G_12.00.21P_gsm_sumatra_mbm_flash.sbf located at
S2. For P6 or above phone, flash R564_G_12.00.46P_gsm_sumatra_flash.sbf
S3. If you want to use other flex different from the default release, please flash the flex according to your requirement. Please refer below "AP and BP flex part" to get more flex information.(This step is optional)
**********************
1ff flash step
**********************
If you use WIG/BIG tool generated the 1ff, please make sure blow steps before you flash the 1ff
S1. you must flash the BP rom superfile before the 1ff for new bootloader, which had been integrated since R564_G_12.00.44P
S2. If above AP flash steps requires flash mbm superfile, you need flash mbm superfile before the 1ff
S3. Enter AP flash mode, flash the 1ff
"GSZMTRAMABRLA041" "GSM::R5.6.4::E2::LA Amazonia Celular Customer Model Model - Sumatra"
"GSZMTRRTLBRLA041" "GSM::R5.6.4::E2::LA Retail Brazil Customer Model Model - Sumatra"
"GSZMTRTLMBRLA041" "GSM::R5.6.4::E2::LA Telemig Brazil Customer Model Model - Sumatra"
