 Show Posts
|
|
Pages: [1] 2
|
|
12
|
Motorola Phone Models / Motorola E398/E790/E798/E1 / Re: Help me!!!My E398 cant get the signal,,,
|
on: April 15, 2009, 08:16:39 pm
|
|
try backuping & Uploading signal parameter...
In the few cases we had experienced mgkn Low signal or no signal after mgkn we ples a MP, but there is no previous problems.
This can occur due to interference on the Calibration H / W (PA IC). so we have good backup calibration parameters H / W when we experience our sewaktu2 incident kek above.
Next I include step image for backuping Uploading and tuning parameters.
for backuping.
1. RadioComm open and make sure that HP already connect with radiocomm
(google it)
2. In the Features section, open the tab NV / seem, and you will see new windows.
3. In the Product section, select the type of weight that is GSM_P2K
4. put read, "The process backuping akan running (progress bar), in some parameter error will occur but this is normal, just click OK to complete".
5.Save parameters we are successful in Backup format NVM in accordance with the type of HP
Done, close the window NV / seem to Normal and press the button to restart Hp back to Normal Mode
for uploading
Tuning parameters for Uploading (when the problem of signal) in the NV / seem, click the Open button
Select File tuning (extension NVM) in accordance with the type of HP
in attack
Then click the Write button, wait for finished and restart HP
If problems occur because of signal problems corupt tuning parameters over the way you will complete the problems.
tutor is recapitulated from GEANICEV from motouser ...
hopefully helpful
|
|
|
|
|
13
|
Motorola Phone Models / ELF / Re: ELF Discussions
|
on: April 04, 2009, 03:40:44 am
|
how abaut set drm in a/c, bcoz i using MP nano_II to0.. sorry iam still noobZ... so elfloader n lib.o not update too... can make drmchanger funcion with old elfpack?... can U help me masta... sorry for stupid question...  |
|
|
|
|
