Moto Hell - The Motorola Modding Community

Motorola Phone Models => Software (PC) => Topic started by: hackergiga on July 29, 2011, 08:46:55 pm



Title: Radiocomm 11.11.7
Post by: hackergiga on July 29, 2011, 08:46:55 pm
RadioComm Release Notes:

Version 11.11.7 (Released 8/26/10)

RadioComm
-   General
-   Updated QC NV List so writing NV on Olympus was correct
-   CDMA1X
-   GSM
-   3G
-   Common
-   3GSM
   
ATLAS Reader - Tool for read/write ATLAS.

AUL Reader - Tool for read/write AUL.

Call Performance Buffer Reader - This application will find and read the call performance buffer file on the phone and display its contents.

Camera Tester - This application will allow you to do basic testing of the camera intergrated into MD cell phones.

Common Backup/Restore Handler - This application will allow you to backup and restore complete phasing data of a phone.

Conversion Tool - This application will convert and compare many kinds of strings.  It will also do channel to freq, and other conversions.

CPCAP Interface - This is an application that allows the TI CPCAP control program to control registers in the CPCAP chip via RadioComm and Test Commands.

FactoryInformation - This application will allow you to obtain and decode the factory information stored in the phone.

Flex Programmer - This application will allow you to program .hs or flex files into a phone.

File System Explorer - This application will support the reading of the FSAC and QualComm file systems.

GPS Tester - This application will allow you to do testing of products that support the GPS test command.

Keys Application - This application will allow you to send the KEYS, KEY_PRESS and KEY_TEST test commands to the phone.  This simulates a user pressing and releasing keys as well as queries the radio for the last pressed key.

Panic Reader Parser - This application will allow you to read and parse the panic information of a phone.

PCAP2 Reader - Tool for read/write PCAP2.

PhoneBook - This application will read/write a phone book from/to any Motorola phone.  Note: This is basic phone book control.  This does not do categories or funlight settings or any advanced features.

SBCM Parser Utility - This application allows you to enable, disable, download and parse the SBCM file on the phone.

TCMD_Batch_ApplicationTool - This is a test common application to be used by RadioComm and Anthem.

Touch Screen Simulator - This application will allow you to simulate the touch screen on a phone and click within the display to send X/Y coordinates to the phone.

WLAN Tester - This application will allow you to do testing of products that support the WLAN common test command.

8.82 MB

download:
http://www.mediafire.com/file/m9o77pdzinzaww7/RadioComm%20v11.7.4.zip (http://www.mediafire.com/file/m9o77pdzinzaww7/RadioComm%20v11.7.4.zip)



image : http://www.mediafire.com/i/?5ws9rpuz6mo3ykp