Moto Hell - The Motorola Modding Community

Motorola Phone Models => Motorola L2/L6/L6i/V191/V195/V235 => Topic started by: khunter on January 09, 2011, 06:35:10 pm



Title: Moto V190 == Bricked?? Can't Flash!! Please Help!
Post by: khunter on January 09, 2011, 06:35:10 pm
I Unlocked my Motorola V190 using this method http://modmymobile.com/forums/14-slvr-l6-l6i-l2/47952-omfg-unlock-your-l6-free-works.html ...but then all the Text went away...

I can't read any text like "no signal" or "no sim" or settings text etc. (only Icons are visible).

I only made a backup of CG1.

This was the stuff before I flashed with the Firmware posted on page 1 - step 1 (the unlock method):

Boot Loader: 08.A0.

SW Version: R3511_G_0A.50.2DR

Flex: GSUV190MCL01NA08B

================


When I tried to flash it with this file I download from the internet:

http://rapidshare.com/files/301290105/V190_R3511_G_0A.50.2DR_PDS00B_LP0003_DRM0201_JPJAVA_G_0A_V190_01_00_06R_GSUV190MCL01NA08B_1FF.zip

And then Check box "Remove RSA" in F&B3, and save the file again, it loads in Bootloader always and says "Phone Code Sig Error: 39:02;"

When I Check box "Remove RSA (new method for LTE2 phones)" and then flash it, my phone does not boot at all. I have to #* and Power on button to load the boot menu.

And always even though I flash it, it says R3511_G_0A.52.47R

Notice the end part is Not 50.2DR like earlier.

Please help.


=====

Now nothing (F&B3 or RSD Lite)  recognizes that it is connected to the PC.

I just get the boot loader screen...can't even turn it off without removing the battery...

=====

Update:

I managed to get the PC to see the Phone, by using another USB port. I flash it back to the Firmware posted on page 1 - step 1.

Then I used F&B3, and I selected only CG3 from another firmware and flashed it.

Now the phone does not boot up even with *# and power.

The PC can see the Phone but it cannot flash it with any Firmware.

RSD Lite v4.9 says "S Blank Neptune LTE" and

IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000200
DRM Version: N / A
Phone Type: Engineering (F0020000000021A6091611170811)

When I try to flash with the Firmware posted on page 1 - step 1 it says "Warning: You are flashing a reflash file into a phone that appears to be blank. This is only a valid use case if trying to recover a Neptune LTE/LTS based phone that has SECURITY errors. Do you want to proceed with flashing?"

I click Yes.

Then the phone says:

Critical Error:
80
4A

Then RSD Lite says Failed Flashing Process. Phone[0000]. Error erasing subscriber unit. Device API error: 0xE0020083. Command: ERASE (0xE0122083).

What should I do now?

Please help.