Moto Hell - The Motorola Modding Community

Motorola Phone Models => Motorola E398/E790/E798/E1 => Topic started by: devarshi84 on June 21, 2009, 01:48:38 pm



Title: bootloader for ROKR E1.
Post by: devarshi84 on June 21, 2009, 01:48:38 pm
I need bootloader 0A.02.

my phone doesnt read sim and i have tried various things. But then I am planning to go back to basics again.

Here is the story until now. (https://motohell.com/index.php?topic=2404.0)

My phone was lost when I was trying to downgrade the bootloader.

Now I guess that while the phone is starting up, it is missing several necessary files which can be due to the fact that the bootloader was not properly installed.

any guessed or help here?

The only problem my phone has right now is the insert sim issue.


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 21, 2009, 04:59:44 pm
AFAIK.
Only MSC that can flashing BL OA.02
And you already downgrade your BL.
So you need to erase IC flash,dwnld the tool from my reviving tool.
You can pass the TP step.
This method will make your BL to be 07.DO
Hope it work on this case.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 21, 2009, 05:07:47 pm
what is MSC?

How do I erase IC flash?

Also where do I get the 07.do from? Is it the right one here? http://www.e398mod.com/content/view/184/56/
 
and what firmware do I use?



Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 21, 2009, 06:56:47 pm
MSC(motorola service centre)
You only need to click my reviving tool,look in my signature under my profile,see?
All you need was obtained on it.


Title: Re: bootloader for ROKR E1.
Post by: AUFANnada on June 21, 2009, 07:38:46 pm
If you confuse, try - 42R for all - first to check your blank map.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 21, 2009, 09:18:08 pm
The sharing site says your file has virus.


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 21, 2009, 09:31:31 pm
Sorry for it.
It's only ramldr that infected by some virus.
Not to dangerous,more better if you are using deep freeze or norton goback first.
And you must turn off your comp antivirus,coz it will damaged the program.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 21, 2009, 10:29:03 pm
It damaged my pc. It's real virus. Deletes all .exe files.

anyways I tried with RamLDR improved.

Gave me error.

on the laptop it showed 'ERR…373_G_0E.30.49R:GSKKLGOT676SR085'

on the phone it shows ' RDL SIG Error:39:02:'




Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 22, 2009, 04:18:21 am
I never use ramldr improve.
Please use ramldr that was recommended for this case.
Use Deep freeze or norton goback to protect your comp from virus,or try to run from safe mode that will make some virus no act.
Or try download ramldr that's not infected by virus.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 22, 2009, 07:19:16 am
ramldr is what is corrupt in your files.

Can you reload them again?


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 22, 2009, 07:22:46 am
I'm onimod now.
Try to find in esnips.com


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 22, 2009, 07:43:33 am
ok, I finally did it.

this is what the screen shows.

Bootl loader
07.do
Sw version : Not found

MEM_MAP Blank
Service Req'd

Battery ok
ok to program
connect USB
Data cable


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 22, 2009, 01:09:18 pm
Ok good.
Now install PST(MFF)
And flash 42r for all.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 22, 2009, 05:45:39 pm
ok, I couldnt find multi flash flex tool, so I used rsdlite and it did install 42r successfully.

the phone now starts but still with the same message.


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 22, 2009, 09:13:24 pm
The name of MFF is similiar to PST.
And i was put PST 6.7 on it.
What massage do you mean?


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 23, 2009, 09:36:52 am
Bootl loader
07.do
Sw version : Not found

Battery ok
ok to program
connect USB
Data cable


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 23, 2009, 10:55:19 pm
Have you flashed 42r for all using MFF?
Don't use another flasher!


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 24, 2009, 07:08:47 am
I did. :(


Title: Re: bootloader for ROKR E1.
Post by: jzzz on June 25, 2009, 01:08:09 am
Flash again using 42r for all using MFF but don't 4get to check all the option.


Title: Re: bootloader for ROKR E1.
Post by: devarshi84 on June 29, 2009, 06:43:56 pm
you are flashing a reflash file into a phone that appears to be blank. This is only a valid use case if trying to recover a neptune LTE/LTS based phone that has security errors.Do you wish to proceed with flashing?

I got this when I tried to start from the beginning.


Title: Re: bootloader for ROKR E1.
Post by: jzzz on July 06, 2009, 10:57:18 pm
No problem,just try.