Moto Hell - The Motorola Modding Community

i success to start flashing my E2 but while i flashing the mobile the pc restart and when i tried to reflash it it couldn't accept the flashing and got me Error flashing subscriber unit Device API error?

what can i do please help .....

thanks for your help ...
waiting for reply.....

 >:(

ok, r u trying to flash the ap or the bp part? did u remove the batery and try to restart it? give more details...

is full your battery? try to recharge it with other phone. and try to flash again

Try changing another usb port.Use back port.If your E2 could enter bootloader,that means your E2 can still come back to life.I think E2 can't die completely.I myself had killed my phone but U can make it alive by flashing again and again.Just make sure your battery is fully charged.

thanks for your reply,
i can't check the charge of battery cos the E2 go in Ap mod and said bp not ready but it went Ap mod by itself and turn off by itself i couldn't control it , i red in other forums that the bootloader corrupted and i need to flash a new bootloader but i can't know how and where i can find the tools for this .

i think this is right becuase it happened during the flashing interrupt of the process like you pull up the battery during the flashing .

please help as you can ....

thanks again...

Os u retry with another PC.

try with the ultimate, it has de ap and bp part.

first the bp part with the shx then the ap part with the sbf file.

but you need to be sure to have a full charged battery.

( i flashed 1 time with half battery and worked (after an error flahsing))

i once bricked e2 cause of not enough battery while flashing.
i think you should charge your e2 battery to full first with any desktop charger, or use other battery that is fully charged.
then flash using stock moto first, you still able to get to the bootloader? mine wasn' t able to get to bootloader but strangely, i left it for couple of hours, then i was able to get to the bootloader.

reinstall all your motorola application in windows first(the drivers and etc)
clean the registry too by manually search in regedit, search for p2k, delete all available p2k entry
restart and flash it,
my e2 resurrect after i did those steps but the battery is dead, so i changed it to new one. 
oh yeah use lower rsd version, like lower than 3.7 version

i don;t reccomend to flash  ultimate firmware, coz after i was able to get to the bootloader, i tried to flash ultimate but if failed while in 80% progress.  i have to wait a couple of hours to get to the bootloader again to flash stock moto.

good luck, hope you can get it up again.. ;)
it feels good to get it up again,

thanks for all,

i just success to flash my E2 and working fine.

please any body can help in what can i get otherwise loud sound of the new software and how ?

thanks again for your support ......

 :-[

i've upgrade my FW last nite.. so cool, i just wanna upgrade my Volume table.. can u all give us easy step to put in Volume table to our phone??

if youre using katze2, edit ezx_volumetable.cfg using wordpad, change all 9 to 12, it should be loud enough
i think you can do it in other fw too

[pcap_loudspk_music]
 9, 9, 9, 9, 9, 9, 9, 9, 9, 9;


save and copy to your phone at

Filemanager/unrecognizable/My_Favor

Yes, and you can edit it anywhere with Volmodder.. http://www.e2mod.com/content/view/218/28/

ugh the yellow letters are alwful :)

i still dont understand how to use volmodder

sorry for the yellow font color eheheh cant see while youre editing, it is awful :P

just curious, did you repair your bootloader? how did you do that if so?
just in case i need it heheh :p

Check this https://motohell.com/index.php?topic=693.0 and this
https://motohell.com/index.php?topic=842.0