Moto Hell - The Motorola Modding Community

dear all
please help me ASAP

I have used starter xp monster pack on my E398 for more than 1 year, and there were no problems

just the last time, I turned off my cell phone. When I turned it back on, the first boot screen appear only bout second, then the monitor dead. After these, a blinking screen appear (white and dead and white and dead and so on)

I've re-flashed my phone.
Next, it was okey that the phone works normally
but when i turned it off again and try to turn it on, the same problem appears

please help
what should I do now?
ASAP

now I couldn't re-flash, because of low battery problem

thanks

i thinks it's a hardware problem
or try flashing your phone

oops your battery is low... tryto charge it using desktop charger or borrowed from other that own e398

that happened to me when I got a bad skin on my phone... but your variant is very strange

hm it's that true about hardware problem?
any idea about that?

I supposed to think so
because I have reflashed. It worked after reflashed, but then again the same problem appear when I turned off the phone and try to turn it on
 :-[

any other ideas / suggestion / respond?

after u charge your battery try to restore your backup first then let see if it works

remove your transflash card and retry

If you have the same problem after flashing different MPs,then there must be something related to your h/w..

it means that there is a problem in connecting the device
sometimes I got that messages too
it is because of the cable

try to give some pressure or tension on the cable connected to phone. For example by pulling, pushing, or another things.

it is not working. I even tried turn it on without transflash and sim card
the boot image appear on secong, then it dead and blinking white and dead and white and dead and so on till I remove the battery

do u think that there is a relation between battery and that problem?
could u please explain me your presume?

I thought that there was no relation with the battery.
because when the problem appeared, the battery still medium full. I even have reflashed (which cannot be done in low battery). It worked sucessfully after reflashed but unfortunately the same problem appeared when I turned it off again and trying to turn it on

thanks

sorry dude - I posted that in the wrong thread... deleted now :) Sorry again


On your problem - there is nothing else to do than find another or charge the existing battery (no other way around) and retry to flash something (if you have primary or secondary bootloader - no matter). Other way - service shop

If you can you can do that http://www.e398mod.com/content/view/111/25/ (http://www.e398mod.com/content/view/111/25/)

It's so great that you can flash your mobile witout batery.

some one has tried to modding the usb cable.. but u cant flash and charge at the same time.. its not function.. the usb can charge when phone standby to normal mode. not to boot loader mode..

that's true - you can't charge while you are in bootloader mode

so it's useless modding our cable data

not really - it's still cool when you are working with your phone in normal mode... If you mod your phone a lot you may even forget where you put your charger :))

The miniusb cable for E2 is charging by default. I do not know where is my standart charger - I only use the pc cable :)

so do e680i mini usb cable phil
it charge by default

(http://pictures.kyozou.com/pictures/_3/2185/2184478.jpg)

i think usb data cable like this can charge the phone as default when connect to PC.. our usb cable(e398) cannot charge when connect to pc/notebook..

This one is for E770 i think(same cable is used to Sony PSP and it's 3 times cheaper in my county ;D).



It is worth to mod ur E398 cable I did it and here are the results:

(http://members.lycos.co.uk/eog/cable1.jpg)
This is my USB cable inside orange and white strings are added and they are stick to each other(sorry rof quality)

(http://members.lycos.co.uk/eog/cable2.png)
Here is my cable connected to my mobile(no metter if Data/Fax or Memory Card mode). As you can see there is no batery symbol and battery is not being used right now(it means that i can take it away at any time and moblile will not turn off(look at the movie to see that it works)

Here is the movie that shows that cable is worth to be moded for BootLoader Mode:

Mirror 1(lycos very slow):
mp4 Version(Recorded by my 2nd mobile) (http://members.lycos.co.uk/eog/cable.mp4) 436KB
avi Version(DivX contains my comments) (http://members.lycos.co.uk/eog/cable.avi) 2.33MB

Mirror 2(ovh.org very fast):
mp4 Version(Recorded by my 2nd mobile) (http://iuforum.ovh.org/cable.mp4) 436KB
avi Version(DivX contains my comments) (http://iuforum.ovh.org/cable.avi) 2.33MB

yeahh thats cool.. so i should find E770 data transfer cable right? i think the cable is not available at phone shop hahaha.. sold out or out of order

As Far As I know data Cable for Moto A1000 same like e398 n it can charging

are u sure motomaniacs?? E1000 or A1000?