|
Title: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 09, 2009, 10:07:00 pm My phone E398 and i try flash my phone to new mp(R373_G_0E.30.79R_reflash_FIXED_for_E398.shx.) when i already upgrade,my phone is dead.when i try to turn my phone on,just the keypad is only on and it dead again.At the same time my screen blank.Now my phone can't connet to pc.plz help,what i have to do.
Title: Re: help..my phone can't to turn on after i flash new mp Post by: anthonyhermawan on December 10, 2009, 05:13:17 am You should not flash any reflash 79R to phone, if it's still in 4xR, becoz the flex is incompatible with 79R FW. Reflash can be used only if phone has been flashed with 79R fullflash. For repairing for example.
Solution, could you enter on bootloader mode by pressing and hold * + # + Red menu button simultaneously? If it cans, just flashes with your backup or any MP 4xr or 7xr for E398. Good luck and do safe modding. Title: Re: help..my phone can't to turn on after i flash new mp Post by: anthonyhermawan on December 10, 2009, 05:15:06 am You should not flash any reflash 79R to phone, if it's still in 4xR, becoz the flex is incompatible with 79R FW. Reflash can be used only if phone has been flashed with 79R fullflash. For repairing for example.
Solution, could you enter on bootloader mode by pressing and hold * + # + Red menu button simultaneously? If it cans, just flashes with your backup or any MP 4xr or 7xr for E398. Good luck and do safe modding. Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 10, 2009, 06:46:22 am i already enter on bootloader mode and try to flash back (backup from original) but the format is not support with flash & backup 3.0.7 ( original backup is fbp )
Title: Re: help..my phone can't to turn on after i flash new mp Post by: jzzz on December 10, 2009, 07:02:25 am Click n Download my reviving tool.
And get 42r for all inside. Flash to your phone using MultiFlashFlex(PST). All tools are obtained inside. Title: Re: help..my phone can't to turn on after i flash new mp Post by: anthonyhermawan on December 10, 2009, 07:18:01 am Are you sure your FBP file is not supported by FB3? Try to open FB3, go to Write Data, click Select Flash File in the right below, then select your backup. If it can't, your backup might corrupt or there are some mistakes when backuping. Try with restore with FB2.62, download it at E398mod.com, software section.
Or try to flash another fullflash MP E398 based 4xR or 7xR. You're on R372 or R373 already? Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 12, 2009, 06:21:21 pm My backup file still can't to open.finally i flash my phone with another mp (R373_G_OE.30.42R) and my phone alive again..thanks.......
i want to know,with one MP is Support with my phone....my new MP have a short Video recording...can u suggest to me with one MP (The best) or the new MP for my Phone and how i can get it. Title: Re: help..my phone can't to turn on after i flash new mp Post by: chikenrun on December 12, 2009, 10:40:00 pm My backup file still can't to open.finally i flash my phone with another mp (R373_G_OE.30.42R) and my phone alive again..thanks....... i want to know,with one MP is Support with my phone....my new MP have a short Video recording...can u suggest to me with one MP (The best) or the new MP for my Phone and how i can get it. Title: Re: help..my phone can't to turn on after i flash new mp Post by: chikenrun on December 12, 2009, 10:47:27 pm My backup file still can't to open.finally i flash my phone with another mp (R373_G_OE.30.42R) and my phone alive again..thanks....... try nano engine v3 orign ! Get it from e398mod.com ..!i want to know,with one MP is Support with my phone....my new MP have a short Video recording...can u suggest to me with one MP (The best) or the new MP for my Phone and how i can get it. Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 12, 2009, 11:55:00 pm i'm confius..what the different about 42R and 49R...can u explain for me..
i'm scare my phone dead again. Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 13, 2009, 12:07:14 am i already download nano_3nGiNe 49R...but,when i try to flash to my phone the flash & backup cannot read that mp.the mp(file type) is not same.what i have to do.
Title: Re: help..my phone can't to turn on after i flash new mp Post by: chikenrun on December 13, 2009, 01:16:59 am Frist what ur phone ?
when rokr dwnld rokr ver !,in fb 3.0 or above active profile rokr e1 reflased ! when e398 dwnld e398 ver !,in fb active profile e398 reflased to e1 ! second ! when select chose flash file in fb,in dialog box type file ,chose all file (sbf,fb etc)! am using fb 3.0.6 and flash nano engine v3 orign to my e398 succes bro ! Title: Re: help..my phone can't to turn on after i flash new mp Post by: ritza_ll on December 13, 2009, 01:27:07 am Sometimes MP file are compressed to .7z, .rar, or .zip. May be you forget to extract first before flash it. Use 7z or winrar.
Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 13, 2009, 06:53:28 pm thanks for all of you.....your guide really used for me..
now my phone flash with nano engine V3 origin.. great MP...itry enjoy with it. guys i want to know something about flash the MP.. how many time i can flash the mp with my phone or it not have a limit. Title: Re: help..my phone can't to turn on after i flash new mp Post by: chikenrun on December 13, 2009, 07:30:51 pm before am use nano engine v3 from masta ritza_ll ! every 2 days am flash my phone !my phone is ok !
but for safely dont to many flas ur phone,becarefull with ur ic flash ?i heer to many flas ur phone make ic flash burn ! Title: Re: help..my phone can't to turn on after i flash new mp Post by: chikenrun on December 13, 2009, 07:33:47 pm before am use nano engine v3 from masta ritza_ll ! every 2 days am flash my phone !my phone is ok !
but for safely dont to many flas ur phone,becarefull with ur ic flash ?i heer to many flas ur phone make ic flash burn ! Title: Re: help..my phone can't to turn on after i flash new mp Post by: akhzam on December 15, 2009, 07:13:49 pm ok....hopefully that ic not going to burn...
i like to enjoy the nano engine first... |