|
Title: My Rokr Dying Post by: Mazthree on June 27, 2009, 08:18:50 am My Rokr won't turn on. I flashed with many MP, but it did't work. When I finished Flashing, only keypad lamp turn on, and suddenly off, and the screen did't on, the SW version did't change. I a'm using BL 07.DO. Please...
Title: Re: My Rokr Dying Post by: gayoe on June 27, 2009, 10:53:23 am i guess you have broken PDS.
if you are using BL 07.D0 then try MotoRepairStudio demo to create new PDS for your phone then flash new MP. Title: Re: My Rokr Dying Post by: Mazthree on June 27, 2009, 05:21:39 pm I have, but that did't work. I did over and over again.. After I repair with MRS, I flashed with 42_for all with FB3.7. And then I flash with MP. It did't work. any solutions?
Title: Re: My Rokr Dying Post by: jzzz on June 27, 2009, 07:18:21 pm You've done a mistake.
You must flash 42r for all only with MFF. Do not using another flasher! Title: Re: My Rokr Dying Post by: Mazthree on June 27, 2009, 08:08:27 pm what about using FB2.7? because i Don't have MFF. My MFF can't run. The PST always fail searching WIBU BOX.
Title: Re: My Rokr Dying Post by: jzzz on June 27, 2009, 10:47:31 pm No you can't,only MFF that supporting 42r for all.
You must using win XP sp1 n sp2 to run MFF(PST). Title: Re: My Rokr Dying Post by: MarkoP on June 28, 2009, 04:51:20 am You've done a mistake. You must flash 42r for all only with MFF. Do not using another flasher! It's not important if FB CAN flash it. If it's not displaying error than it's ok. MFF is recommended because it won't give error while FB might. If you are flashing with FB use 3.06 or above. Anyway, is SW version changed after creating new PDS and flashing? Title: Re: My Rokr Dying Post by: Mazthree on June 28, 2009, 07:48:24 am I always repair with MRS and then I flash with FB 3.6. But nothing happened. The screen is still blank, and sometimes the keypad lights is on and suddenly off again. The BL is disseapear, but the phone is connect to the PC. After I flashed, the screen still blank, the BL not seen, and the phone getting warm and hot. Is the HW problem? I've tried to clean with thinner, but it didn't work.. So?
Title: Re: My Rokr Dying Post by: Mazthree on June 28, 2009, 08:05:19 am About SW changing, I don't know. Because the screen is Blank. But in FB3.6, it can read. Sometimes change, sometimes not.
Title: Re: My Rokr Dying Post by: MarkoP on June 28, 2009, 09:44:59 am What does PC says when you connect phone?
Title: Re: My Rokr Dying Post by: Mazthree on June 28, 2009, 06:36:37 pm This is my last action. I've repair again with MRS, I've downgrade to E398 with 2 steps (Vilko's BL), the BL and SW version appears in screen, I've flash with 42_for all full flash, blank screen again, I've flash again with MotoMusic R373_G_0E.30.46R by Jithinsk. The BL and SW version was appears again. Flashing proses is success, but when I Restart the phone, it can't be done. The keypad lights is on, but the screen still blank. Won't restart. Like loss power. is the LCD problem..?
Title: Re: My Rokr Dying Post by: Mazthree on June 29, 2009, 07:57:14 pm Hallo... I'm waiting for your help.. Can anybody help me...?
|