Moto Hell - The Motorola Modding Community

Motorola Phone Models => Motorola E398/E790/E798/E1 => Topic started by: devinz on June 04, 2009, 12:17:55 am



Title: Help me please
Post by: devinz on June 04, 2009, 12:17:55 am
Any one can give me tutorial for installing monster pack to my Moto E398??

I'll really thanks for your helps.


Title: Re: Help me please
Post by: jzzz on June 04, 2009, 01:33:35 am
You need:
1.7zip (http://www.4shared.com/file/101758886/5a115645/7zip.html)
2.Flashbackup (http://www.4shared.com/file/101587791/3b09c076/FlashBackup307.html)
3.Phone Drivers (http://www.4shared.com/file/101591715/ecb6f80b/Motorola_Drivers.html)
4.Monsterpack (http://www.e398mod.com/content/category/7/13/30/)

Following this step:
1.Open flashbackup 3,choose write data tab
2.Select flash file,browse the monster pack in format .shx .fsw .fsb etc
3.Turn off the phone,and hold * # and red button together,it will show your boot loader
4.Connect the phone using data cable
5.It will connect as flash neptune and install the driver
6.Click write
4.Congrats,you did itCaution:
Choose a right profile when flashing using flashbackup 3.
Choose e398 original for first time flashing and e398 reflashed to e1 if already upgrade.


Title: Re: Help me please
Post by: MarkoP on June 04, 2009, 02:28:32 am
But if your phone is R372 you must first convert it to R373


Title: Re: Help me please
Post by: jzzz on June 04, 2009, 03:31:29 am
That's old way for flash bro.
Sometimes that way can kill the phone like racoonboy case.


Title: Re: Help me please
Post by: MarkoP on June 04, 2009, 03:41:46 am
I was thinking on flashing 42r_for_all first...


Title: Re: Help me please
Post by: jzzz on June 04, 2009, 03:46:50 am
Look at the racoonboy case,he flashed 42r for all first,and the phone was gonna dead.


Title: Re: Help me please
Post by: PadangGuci on June 04, 2009, 05:32:04 am
please read related topic first. like are_goenk and gayoe said. you can use 42r for all. and also direct flashing.
jzz, do not flaming here, and do not broke MarkoP, respect him. he is an old member here. respect another opinion.


Title: Re: Help me please
Post by: deQiu on June 04, 2009, 07:55:55 am
yup...the two methods above can be applied, just look around in this forum....but be carefully to read and understand for each step of the method...dont forget to MAKE A BACK UP FIRST and CHECK UR BL...dont make a mistake on flash with wrong BL MP....and the last but not least...think 2 times for 79R..

*just a bad personal experience..:))



Title: Re: Help me please
Post by: MarkoP on June 05, 2009, 12:44:03 am
Look at the racoonboy case,he flashed 42r for all first,and the phone was gonna dead.
That may be caused of program, I flashed like 6 or 7 R372 e398 with MFF (42r_for_all) and everything was fine. And once I tried the same with FB 2.62 and the phone died, but I menage to revive it. Pls give me links to topics where racoonboy explains what happens.

@E398 Master, I am not saying I'm 100% wright, but I have enough expirience so far...


Title: Re: Help me please
Post by: jzzz on June 05, 2009, 01:01:23 am
https://motohell.com/index.php?topic=4612.0

He doesn't explain more specific in thread,but more specific when PM me.
Coz i try to help him with PM.
And he said,when he want to flash,he try to flash 42r for all first,and the phone was gonna dead.


Title: Re: Help me please
Post by: tegezan on June 05, 2009, 02:47:33 am
@ TS
just do the safe modding.. flash with 42 for all first always be a good choice.. :)


Title: Re: Help me please
Post by: devinz on June 11, 2009, 10:08:21 pm
Thanks all...