Moto Hell - The Motorola Modding Community

Motorola Phone Models => Motorola E398/E790/E798/E1 => Topic started by: anthonyhermawan on May 17, 2009, 06:58:31 pm



Title: How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ?
Post by: anthonyhermawan on May 17, 2009, 06:58:31 pm
How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ? Is it possible? How to do that? Without testpoint. Bcoz my BL 0A.02 becomes strange. I must changing ofset 1B with 40 when flashing every firmware. In the past, after succeed reverting from 79R to 4xR, i just changed 1B from 00 to 01, but after leaving elektro latest 04a,n flashing every firmware 4xR based, i always stucked in BL unless i change ofsef 1b in cg1 with 40,it will be normal again. With 01 like in the past, always no succeed. It stucked in BL. What happened? is it BL corrupted? I know that BL 0A.02 is unflashable. Any guide or solution?


Title: Re: How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ?
Post by: jzzz on May 17, 2009, 08:15:47 pm
In my opinion,there is no way to do that,coz erasing IC flash memory it"s mean erasing all.
Maybe there is way to use ramldr that's for formatting OA.02.
I think that's only to change start addr,but till now,no one know the start addr.
Only many tutor for 07.DO
My advice is,,
1.Try to change start addr in ramldr with your own self.
But,it will make your BL 07.DO if you are do a mistakes.
2.Do TP,but will downgrade your BL,it will help,but if you want it.


Title: Re: How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ?
Post by: PadangGuci on June 02, 2009, 07:52:22 am
simple methode :
flash only CG3 from full backup using FB2.6 , not using FB3.


Title: Re: How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ?
Post by: jzzz on June 03, 2009, 07:49:10 pm
No you can't @e398.     
It can't erasing IC flash.


Title: Re: How to erase all of IC flash memory,except bootloader and PDS on ROKR E1 ?
Post by: PadangGuci on June 04, 2009, 05:22:27 am
yes it does. tested. just try it..
i said use fb2.6 make backup first in fbp¤ extended. then convert to shx using fb2.6. then flash only CG3 using fb2.6.
tested. not only theory.


edit : please respect other member opinion.. every flaming word not allowed here.. thanks :)