Moto Hell - The Motorola Modding Community

hi guys in the past week i've faced a problem and spent much time trying to solve it but unfortunately my tries ended with a failure.

the problem is that when i enter the bootloading mode in my E1 it works but after running FlashBack (any version) to flash or even patch the bootloader terminates and the app says send error! i dunno what aused this problem but my phone used to work like a charm last month and i haven't installed anything unusual :)

any help will be appreciated thanks.

if u used flashbackup 3.07,change "active phone profile" to motorola e1 rokr (original).cmiiw

I ever have that problem when flashing my E1 ori.
When send CG1, it's always stop in the middle of progress
The problem is from my computer usb port.
When I change to other port it's work perfectly.

first of all thanks for trying to help guys appreciated :D

@oddity

the profile is automaticly selected as E1 ROKR original so it's not the problem...

@ritza_ll

i never came across that idea but i tried it later on today and still it didn't solve my problem, when i connect my phone everything is fine as a normal flashing progress but when i press flash/quick flash/apply patch anything to write to my phone's firmware it automaticly disconnects from pc the bootloader screen shutsdown and i get an error sending loader.....

Maybe the problem is on ur MP, how bout the other MP? Have the same problem?

use fb 3 n flash again
ithink like ritza_ll says
it's your port
CMIIW

PackPunk i think their are two possible reasons either my phones pins are broke (although it charges ok) else my pc would be screwed :/

it doesn't have to do with ports since i changed to all of my 6 ports and none worked neither the MP since phone shuts not PC.

try other flasher software like Motorola Flash And Test Command (Motorola PST), but at bootloader mode...

I 've been toruble like yours. And it perfectly works. Try 2 forced boot. and Flash w/ FB3.