Moto Hell - The Motorola Modding Community

Evening,
My e398 having some problems here..
When i press the red button, the lights at the keypad turn on, after a while, it went off again.
I can still enter bootloader and i flashed a new mp but the same thing happens

can anyone help me...? T_T..

what did you do beffore this problem appears

Did you flash with elf-enable MP? If you did it delete elf folder in TF first.
CMIIW

MotoManiacs®  - Before that, Its was raining and i use it under the rain. Then when i restart the hp with 'chat", and here comes the problem.
packpunk - Yeap, i even remove my tf card and try to turn it on but failed..

I cant even charge my hp. When i insert the charger cable, nothing happens

Whats HP? :S

If it works in bootloader I dont see why I doesnt work when you flash it.

Packpunk, I thought of the same thing...

Do you have some full backup to restore? That blinking white screen means some CG is bad, at least from my experience.. Or that your elfloader doesnt work..

oh sry, hp = handphone.

the bootloader works, but when the phone is turn on, just the keypad hv lights, but the screen is blank. after a while, it went off again.

and yeah, i tried restoring the backup and even try flashing new mp but same thing happens

maybe u need apply a flash without patches and see what happen...
if u can enter to bootloader just flash a backup or other MP... remove before ur TF and if u have "ELF" delete the folder.

i tried all ways.. still cant on..
i uploaded the condition of my phone. take a look..

http://www.youtube.com/watch?v=Bbz-FSU-MqU

i can see... u can enter to bootloader.. if can this u're saved...
enter to boot and flash a backup or one MP...

you need to open your phone.
open KeyTone, then LCD. Then speakers (buzzer).....do this carefully. Don't screw any micro component !!
Check the connector Socket, if pins not correct, fix it with Solder
Before assemble again, you need to drain your phone (can do with sun light).
last, check your batt, and flash with new MP
hope this can HELP. good luck man  ;) ;)

Main steps :
1.disassemble
2.drain (keep your phone dry)
3.check connector
4.assemble
5.flash again

(i think this what he mean)

hey.. thx man.. i'll try it once i find the screw to open it up

hey.. i manage to open it up.. so which connector socket u mean?

... anyone willing to help me..?

Do NOT use SOLDER inside your phone!!

Completely disassemble your phone - http://www.e398mod.com/content/view/471/25/

Than put it carefully back together and see if that helps anyway. Please be careful.

Hey NiKSY,
I did it a few times but no news. I guess I hv to throw it away..

guys, notice this !! >:( >:(
i NEVER RECOMMENDED to SOLDER, except if there is anything wrong with connector.
(so, do not take any miss communication here !!!)
check connector between batt and phone. bad connection often causing any blank screen, or white screen.
I ever experience problem with charger/USB connector, i disassemble phone then found it.
Then i solder, my phone is okey now, really top performance now,,,
just trying to help. it's yours now....

 and @ JEMAU MANAK (thanks to you) for this
Main steps :
1.disassemble
2.drain (keep your phone dry)
3.check connector
4.assemble
5.flash again

trims a lot  ;)

want to throw your phone ??
he he he... throw it (give your phone) to me, would be nice pleasure to receive   ;) ;)...
are you sure ???

guys, OPTIMIST, DO NOT GIVE UP !!!

hey... SHENo,
My hp sometimes can on
After that when i restart, it same problems occur

You should try testpoint before throwing it away... :(

hmm.. ok.. now, what shall i do? i don see any problem with the connector..
how bout the battery? does battery got to do with this prob?

What I saw on your video I think that the battery is ok, I think your PDS area is corrupted, you must try TP.

You will need full batery for doing TP... Best tutorial to follow is tata78's ;)

hmm.. u mean by following these steps here? http://modmymoto.com/wiki/index.php/E398_Survivial_and_Revival#PDS_Creation

Nope, steps HERE > https://motohell.com/index.php?topic=2611.0

man.. still not working..
How to short tp? jsut place a metal clip on it?

Have you seen this image? http://tinypic.com/i74vb4.jpg
It says everything about TP... But dont do all that says in the image, follow tata78's tutorial.

Hey NiKSY,
thanks for the picture, i gotta try soon...

I still cant bring my e398 back to life.. =(

*edited*

I followed tata78's tutorial. After i flashed 42r for all and flash another mp, the same thing occurs.

Anyone willing to help me..?
Currently my hp shows

Boot Loader
07.D0
SW Version:
R372_G_0E.20.99
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Connect USB
Data Cable

I flash with 42r_for_all mp and then flash with another mp. But the same thing occurs..
Once or twice, my phone turned on when i press the red button. But once I off the phone, I cant on it again... Can someone plz help..?

Im starting to believe that your phone has some hardware failure... After just flashing 42R_for_all FULL nothing happens? Bootloader info doesnt change?

Have you tryed the motorep studio?

NiKSY
After flashing 42r_for_all FULL, bootloader did changed. R373........42r
But still, i am unable to turn on my phone.
I just flashed motohell Mp, and now, the bootloader did NOT change.

buster_merryfield 
yeap.. i tried using motorep studio. But same thing happens