|
Title: Backup Original Firmware Question (R564_G_12.0146P) Post by: ao_tenshi on July 16, 2008, 01:13:09 pm Hi All,
My E2 is currently in stock firmware, and I was hoping to make a backup of it before putting in the latest firmware. I have read that there is a GetOS mpkg file, but my current firmware does not allow me to run mpkg files... any ideas? :'( So hoping to get some help with backup of current firmware, language settings etc. Thanks in advance! Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: hanzkrenztn on July 17, 2008, 06:46:05 am i think u cant backup your firmware in stock firmware. stock firmware doesn't support the mpkg file and doesn't support telnet too. and for now, there are no pc's software that support for backup firmware e2. so u must backup your contact manually with notes maybe..
Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: ao_tenshi on July 17, 2008, 01:33:54 pm So if I install the latest firmware and didnt like it, I can no longer return to my current stock firmware? :S
Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: fade2black on July 17, 2008, 03:52:06 pm You can backup stock FW with PC Software, but BP part only.
Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: fade2black on July 17, 2008, 10:30:02 pm You must have:
1. Motorola Driver installed in your PC 2. P2KTools VS ver. 3.0.8 or later for making backup 3. Flash & Backup ver. 3.0.6 or later for making SHX file (BP part) 1st of all, make sure the phone connection is set to "Modem". ------------------------------------------------------------- How to make a FULL backup: 1. Run P2KTools VS and set P2K mode to P2K05. 2. Phone in "BP bootloader mode". 3. Connect the phone using the USB cable. 4. Change P2KTools VS to Flash mode --> Flash-Terminal 5. Memory operations: Type "10000000" in the "Start Address" field and "12000000" in the "End address" field. 6. Press "Save memory range" (Wait the process until finish, it will take a few minutes!!) 7. After finished, make sure backup file size must be 33.554.432 bytes, not more, not less!!! How to make a PARTIAL backup: 1. Steps 1-4 are the same as "How to make a FULL backup". 2. Memory operations: [BP memory address] CG:Start address-End address RDL1 : 03FC8000 - 03FE7FF7 CG0 : 10080000 - 100800C7 CG1 : 100800C8 - 102E44BF CG2 : 10390000 - 103FFFFF CG3 : 10040000 - 10066E27 CG7 : 10350000 - 1035FFFF CG18 : 10330000 - 103307FF 3. Press "Save memory range" (Wait the process until finish, it will take a few minutes!!) How to restore your backup: 1. Steps 1-4 are the same as "How to make a FULL backup". 2. Memory operations: fill memory address in "Start address" and "End address" field. 3. Press "Send binary file" --> choose your backup file (Wait the process until finish, it will take a few minutes!!) 4. Open the battery and insert it again, then turn ON your phone. ----------------------------------------------------------- How to make SHX backup file: 1. Run Flash & Backup --> Firmwares --> Select file, choose shx file from any Monster Packs. 2. Select code groups (CG) and press "Replace", choose your backup file. 3. Press "Save as..." (SHX type). Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: hanzkrenztn on July 18, 2008, 11:15:51 am wow, is that really work? nice tutorial..
Title: Re: Backup Original Firmware Question (R564_G_12.0146P) Post by: silentsnow31802 on October 09, 2008, 06:29:55 pm Thank you for this information! Backup created successfully :)
|