|
Title: for L7 09.02 BL....Juz read this bro Post by: therabitia on May 28, 2008, 08:56:57 pm Hi guyz...I had a nitemare few days a go...but now its over. I got something new though actually I learnt it from m3 site. I juz wana say thanxs a bunch to Manas for the guide to downgrade L7 with BL 09.02 to 08.D0. it is easier than do the test point.
i got my L7 brick after I tried to flash it using other MP with different BL (08.D0 and 08.0A). Then I got it stuck on BL screen:BL 09.02 PH SIG ERR 35:02. iF you have the same problem...Here I can show you how to fix it. the steps: 1. 1. Flash your phone with the attached L7e font by Flash&Backup3 and wait for the "close" inscription. (close inscription means your will become blank or virtually dead) 2. Remove then cable and battery. 3. Open P2K_Easy_Tool_v3.9, select your phone model and go to "Repair" then "Full repair PDS zone". 4. Now connect the cable without battery and press "Do selected job" then "OK". 5. (a) Disconnect phone, press * & # button simultaneously and insert the battery. you will probably get the 08.D0/08.A0 boot loader . If you get any boot loader the proceed to Step 7 If you do not get any boot loader the proceed to Step 5(b) (b) Put the battery, open Ramldr 2_0.31, press "Send loader", then Write BOOT and choose the bootl oader you want in your phone: Ex: for L7 - 08. D0 & V360 - 08.A0 6. Close the program. 7. Open Flash & Backup and flash your phone with any compatible firmware/MP with boot loader 08.D0(for L7) / 08.A0(for V360) . P2K easy tool V3.9 is a warez, so google it. Dont use any other versions.Only P2K easy tool V3.9 here is the link for BL downgrader :http://www.modmymoto.com/forums/downloads.php?do=file&id=6606 for other file, you may find it in m3 or if you still get some trouble, let me know it at therabitia@gmail.com Finally, Thanks a lot for Manas Moto for the guidance. Now My Smart Slim Moto is alive...Great Moto |