|
Title: R564_G_12.00.46P Stock Post by: p0ft on April 06, 2008, 04:04:05 pm Ok I've downloaded this from e2mod.com and I don't have any clue on how to install it. I've read the readme file and still i don't have a clue.
so can you help me through this? :D here's the link for the file: http://www.e2mod.com/content/view/89/26/ Right now I'm using Titanium Extreme II, but I need to switch back to a stock version. With the flex information "Retail Brazil Customer Model Model". Thanks in advance. :D btw, here's the readme info: Notes For Flash **************** You MUST use RSD 2.3 or above to flash the code *********************** Step 1: flash BP part *********************** To enter BP flash mode, hold VR key and insert battery(or apply power) then press power key, when red screen appeared, then release the VR key and press VR key again, it will display "USB BP Pass Through Mode", that means you have entered into the BP flash mode. 1. Flash the BP phone code: Use the R564_G_12.00.46P_flash_dev_rom.shx to flash your phone Please follow below step to upgrade your phone s1. Backup your Phasing data, (Sumatra_Default_Phasing_Data_13R.nvm) s2. Download the eraser superfile Barbados_Martinique_production_Eraser.shx, then flash it into the phone s3. Download the Blanking superfile(R564_G_12.00.46P_flash_dev_rom.shx) , then flash it into phone s4. Resotore your phasing data s5. Flex BP Manufacturing flex version 2. Flex BP non-manufacturing flex version you need to select the flex model that you should flex according to your own requirement ********************** Step2: flash AP part ********************** To enter AP flash mode, Hold VR key and insert battery(or apply power) and press power key, red screen will appear and display MBM FLASH MODE Please be noted that this flash step is only for P6 or above phone, we won't provide P5 or blow phone support any more S1. If your phone's version is lower than R564_G_12.00.21P or your boot version is not BOOT_G_00.02.05R_SUMATRA, flash R564_G_12.00.21P_gsm_sumatra_mbm_flash.sbf located at S2. For P6 or above phone, flash R564_G_12.00.46P_gsm_sumatra_flash.sbf S3. If you want to use other flex different from the default release, please flash the flex according to your requirement. Please refer below "AP and BP flex part" to get more flex information.(This step is optional) ********************** 1ff flash step ********************** If you use WIG/BIG tool generated the 1ff, please make sure blow steps before you flash the 1ff S1. you must flash the BP rom superfile before the 1ff for new bootloader, which had been integrated since R564_G_12.00.44P S2. If above AP flash steps requires flash mbm superfile, you need flash mbm superfile before the 1ff S3. Enter AP flash mode, flash the 1ff "GSZMTRAMABRLA041" "GSM::R5.6.4::E2::LA Amazonia Celular Customer Model Model - Sumatra" "GSZMTRRTLBRLA041" "GSM::R5.6.4::E2::LA Retail Brazil Customer Model Model - Sumatra" "GSZMTRTLMBRLA041" "GSM::R5.6.4::E2::LA Telemig Brazil Customer Model Model - Sumatra" Title: Re: R564_G_12.00.46P Stock Post by: osavill on June 22, 2008, 01:45:14 pm Likewise, what is "Phasing data" and how do you back it up?! If there's one thing that appears to be missing from the Moto tools it's how to back up any flash images from the 'phone! I am guessing that this may be my old friend the radio calibration data, especially as it appear the instructions encourage you to do an erase all on the Flash
s2. Download the eraser superfile Barbados_Martinique_production_Eraser.shx, then flash it into the phone s3. Download the Blanking superfile(R564_G_12.00.46P_flash_dev_rom.shx) , then flash it into phone It sounds like this really is doing an erase everything in the NVRAM / flash |