|
Title: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 02:50:46 am Thank you for paying attention to this thread, this is an urgent problem.
I previously had the Speed ituneS monster pack (see this link http://www.e398mod.com/content/view/134/30/) and I eventually got fed up with it, so I used Flash Backup to make Full backup, PDS backup and bootloader backup and then I flashed it with Revolution Grand Finale (see this link http://www.e398mod.com/content/view/516/30/). As it was going to take alot of time I went downstairs and had dinner. When I got backup, I saw my phone off (which is normal, right) and Flash Backup idle. So I tried turning on my phone and, unluckily for me, it only made a short vibration and did not respond at all. So then I read Survival and Revival (see this link http://www.e398mod.com/content/view/11/25/) and i tried pushing in the pins and inserting the battery with no luck, I just got the same vibration response. The battery was fully charged before I tried this, there was a MicroSD card in there as well. Please, even if you have no idea, at least voice your two cents as to what I should do. Karma for the first person to get me a working fix. Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 04, 2008, 03:08:04 am okay
you can choose 2 way to get in to bootloader 1. ForceBoot pull out your battery .... press n hold * # .... the slide the battery in 2. sortpin (http://i24.photobucket.com/albums/c33/bobzilla2/TestPointMethod2.jpg) Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 03:17:47 am Thanks alot mate!
Thank you so much! The first method you suggested got my phone into bootloader, although I had already tried the second one... Thank you! Also, please leave this topic open so that other people can contribute also, incase someone else has a similar problem. The E398 is truly the phone that never dies. Err... now how the heck can i give karma? And if I can't, could someone else do it instead? Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 04, 2008, 03:32:40 am just click on praise button under my id
congratz bro.... glad i can help you Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 04:12:39 am Oooh boy... looks like I've gotten myself into a jam AGAIN... :(
I have found the problem, it was in the new MP. I tried to install it but my phone messed up again and the method that I tried before (holding the * and # and replacing the battery) does not work! I'm sorry, it was my bad... can you help me though? Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 04, 2008, 04:33:09 am usually it doesnt came up with a single try just try and try btw what happen with the MP??? Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 04:51:12 am Well, I used Flash Backup and selected Flasher as usual and I left my phone for a while. When I came back, it was off and I couldn't turn it on, so there fore there was no way for me to see if it had installed correctly even though that I doubt it did. So I will try and retry, I will see what will happen. Thanks.
Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 04, 2008, 05:57:55 am okay
Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 06:01:04 am Here's an update: It looks like Flash Backup failed to install it properly in the first place now that I look at it. Could this relate to a way to fix up my phone?
Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 04, 2008, 06:02:31 am try another MP or another flashbackup or another flasher program...
try FB 2.62 Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 04, 2008, 03:50:28 pm Just another note, I got my phone alive again by using the 4 pin method (which strangely didn't work the first time...)
Thanks alot! Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: MarkoP on April 05, 2008, 01:12:16 am it didn't work because it's very hard to short those pins correctly... u have to try many times... and sometimes the phone goes to BL but the screen is completelly blank... And which MP have u flashed? The phone is working properly? Or?
and another note: always use flash program that is recommended for some MP... Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: motomaniacs on April 05, 2008, 02:20:39 am Just another note, I got my phone alive again by using the 4 pin method (which strangely didn't work the first time...) Thanks alot! congratz man Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: SkyPioneer on April 08, 2008, 04:23:57 am Another problem.
Now that I have restored my Moto, I am installing another MP but it is stuck on "Extracting code groups" and my phones screen is white. It has been like this for two hours now. Here is a screenshot: (http://img528.imageshack.us/img528/7567/10482637qr0.png) (http://imageshack.us) (http://img528.imageshack.us/img528/7567/10482637qr0.561a79ea42.jpg) (http://g.imageshack.us/g.php?h=528&i=10482637qr0.png) Any help? I should disconnect it, right? But then what? Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: gayoe on April 08, 2008, 05:28:25 am try flashing with FB 3.06 or RSD Lite
Title: Re: Modded E398 has died, need help reviving **URGENT** Post by: argetlam on April 08, 2008, 06:23:51 am Using MFF also can help
|