Moto Hell - The Motorola Modding Community

Motorola Phone Models => Motorola E398/E790/E798/E1 => Topic started by: vini_ns on December 26, 2007, 05:24:43 pm



Title: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: vini_ns on December 26, 2007, 05:24:43 pm
guys i need help. i found in the internet, a moster pack

"SW:R373_49R_mod_elektro255 to “ROKR E1”
Flex: the old 48R fo Revolution mod by me."

and i want to know if i can flash it in my e398 ..

PS: the guy that post this mp, dont talk about bootloader.

tks guys !


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: motomaniacs on December 26, 2007, 07:02:30 pm
I know you ain't talking bout bootloader ....
But there's 2 diffrents type of mp with different bootloader.
Please make sure that mp is for 07.D0 bootloader which is safe to flash to your e398


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: nalimen on December 26, 2007, 07:11:00 pm
the main point is, that MP can't be flashed to your e398, find another version of that MP which aimed to e398.


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: prasasti on December 27, 2007, 02:31:39 am
I think its for ROKR, u need to convert the MP first so it can be flash to E398.
Use Flash & Backup 3.
1. Run Flash & backup go to Firmwares Menu, hit "Select file" button and open your ROKR MP.
2. Check "Remove RSA verification" and "Patch E1 ROKR firmware to work on E398"
3. Hit "Save as" button and wait until the process finish
4. Now you can flash your E398 with the saved file

It work for me.


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: vini_ns on December 27, 2007, 07:33:17 pm
I think its for ROKR, u need to convert the MP first so it can be flash to E398.
Use Flash & Backup 3.
1. Run Flash & backup go to Firmwares Menu, hit "Select file" button and open your ROKR MP.
2. Check "Remove RSA verification" and "Patch E1 ROKR firmware to work on E398"
3. Hit "Save as" button and wait until the process finish
4. Now you can flash your E398 with the saved file

It work for me.


but, where i can find this patch ?
thanks guy. it can be a light ! (:


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: motomaniacs on December 27, 2007, 09:17:07 pm
Isn't that i had wrote a tutor bout converting Rokr MP to e398???
Please check again will you??


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: prasasti on December 28, 2007, 03:48:18 am
@ vini_ns
Where is the patch u r talking about?? Just F&B 3 software.

@motomaniacs
I didnt find it, only patch e398 to ROKR. Not the other way around like vini said.


Title: Re: A mp with firmeware R373 for ROKR works in my e398 ?
Post by: motomaniacs on December 28, 2007, 03:54:50 am
Aw please 4give me..
Made mistake here