|
Title: The EDGE/battery life problem in the E2, Why is it like this?? Post by: XtorT69 on September 03, 2007, 03:58:36 am I have EDGE enabled on my E2 because I use my phone as a modem to connect my pc to the net.
I need it, that is the bottom line. I don't understand how enabling EDGE can cause such a battery life issue.Isn't Edge only active if the phone connects to the net? My old SE W810 (Claimed by my wife)has EDGE and has no battery life issues. Is the quad band part of it to blame? Is it just bad software (the Kronosscottis.hs file) will there be better software in the future? If not them I must toss this phone and get something else. >:( Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: cnmotofan on September 03, 2007, 06:48:39 am toss the phone to me please ;D ;D
I think it is hard to find a solution to the EDGE/battery life problem in the E2 :( :( Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: sg22119 on September 03, 2007, 05:16:11 pm i can do something for you.The way you used was wrong.when you flash *.hs,you didn't open EDGE really.In russian forum and it168 in china this way had been proved is wrong.Now the right way to open EDGE is flashing *.TCS using RadioComm.i will give you a right TCS.
In fact,you can modify the EDGE's seem by yourself with RadioComm.If you can use RadioComm,you could follow this way.EDGE is controled by three SEEM i will tell you. SEEM=02AE_0001 Offset=0000 Length=8 original 0000000000000000 moddet 0A05040201020000 SEEM=02AF_0001 Offset=0000 Length=2 original 0027 moddet 0075 SEEM=0032_0001 Offset= 0089 Length=1 original 03 moddet 07 this seem can open or close the GPRS's status. SEEM=010A_0001 Offset=0000 Length=1 original (when you link,GPRS's status can be seen) 03 moddet(always display GPRS's status) 01 there are two appurtenances.one is open,another is close. Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: Scottish on September 03, 2007, 07:00:53 pm enabled EDGE only TCS recommend http://forum.motofan.ru/index.php?showtopic=102097
Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: Exploited on September 03, 2007, 09:19:43 pm use what sg22119 said
Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: XtorT69 on September 04, 2007, 12:41:57 am Thanks guys. I will try what sg22119 suggested.
Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: PacoL250 on October 15, 2007, 06:57:46 pm i can do something for you.The way you used was wrong.when you flash *.hs,you didn't open EDGE really.In russian forum and it168 in china this way had been proved is wrong.Now the right way to open EDGE is flashing *.TCS using RadioComm.i will give you a right TCS. In fact,you can modify the EDGE's seem by yourself with RadioComm.If you can use RadioComm,you could follow this way.EDGE is controled by three SEEM i will tell you. SEEM=02AE_0001 Offset=0000 Length=8 original 0000000000000000 moddet 0A05040201020000 SEEM=02AF_0001 Offset=0000 Length=2 original 0027 moddet 0075 SEEM=0032_0001 Offset= 0089 Length=1 original 03 moddet 07 this seem can open or close the GPRS's status. SEEM=010A_0001 Offset=0000 Length=1 original (when you link,GPRS's status can be seen) 03 moddet(always display GPRS's status) 01 there are two appurtenances.one is open,another is close. So I downloaded the *.TCS file for NO EDGE, but exactly how do I go about flashing the phone with that file via RadioComm? Exactly what specifically do I have to do in order to shut off EDGE? Just upload that file? If so, how? Thanks! Title: Re: The EDGE/battery life problem in the E2, Why is it like this?? Post by: zjole on October 15, 2007, 10:14:40 pm Open RadioComm -> Features -> Run Test Command Script
navigate to the .tcs script and Run |