|
Title: Help. E8 is not powering up after mod. Post by: doom4machine on February 26, 2009, 12:48:53 pm please help me guys. i modded the ilove3d 141CR fw, as per instructions. my previous bootloader was 06a9. so i moded the bootloader first, then the fw. but now, the E8 doesn't switch on at all!! the battery is correct, i have checked it using a multimeter....what to do ? please help me as early as possible.
Title: Re: Help. E8 is not powering up after mod. Post by: huatz84 on February 26, 2009, 07:15:33 pm Your BL is 06.A9.You can't flash the nonRSA BL coz it's for 06.A3.And you have resulted in a brick.
Title: Re: Help. E8 is not powering up after mod. Post by: doom4machine on February 26, 2009, 09:11:38 pm So, its bricked. It can be repaired at a service center right ? Cause i am sending it to one.
Title: Re: Help. E8 is not powering up after mod. Post by: AV3LaR on February 26, 2009, 09:33:51 pm Yes, but it'll take a while, as they will tell you your mainboard is damaged, it seems they all give the same answer when they don't know what's wrong, those dumb a** b**tards
xD Title: Re: Help. E8 is not powering up after mod. Post by: CORO on June 07, 2009, 10:53:41 pm so the problem is still not solve?I've my e8 with 06.a9 dead either .
"*" + "#" + power still cant seen BL. if some one know how to fix it,please tell me Title: Re: Help. E8 is not powering up after mod. Post by: error398 on June 09, 2009, 12:25:17 am try to plug with usb cable, it will detect, and ur phone have a chance to live again
Title: Re: Help. E8 is not powering up after mod. Post by: CORO on June 10, 2009, 02:23:36 am I've tryed too."*" + "#" + power button with cable plugged.but its no respon at all.
yesterday I bring to moto service centre, the technicians do the same what I've done. hope there some good news from service centre,I ve still guarantee but I lost bill of payment. |